- Paint protection film (PPF) protects against stone chips and scratches: it is a thick, physical layer.
- A ceramic coating adds gloss and makes the paint water-repellent and easy to wash, but it does not stop stones.
- On many sports cars the best solution is to combine them: PPF on the front, ceramic on everything else.
Sooner or later, everyone who buys a sports car asks: ceramic coating or clear film? They are two different products, designed for different problems. Here is how they work and how to choose depending on how you use your car.
What a ceramic coating is
It is a liquid, silica-based coating that, once applied and cured, forms a very thin, hard layer on top of the clear coat. You cannot see it, but you notice it: water runs off in small beads, dirt sticks less and the paint has more depth.
Before it is applied, the paint must be decontaminated and almost always polished, because ceramic “seals in” whatever it finds: if there are swirls, they stay underneath. That is why the preparation is the longest part of the job, and the part that makes the difference.
What paint protection film is
Paint Protection Film is a transparent polyurethane film, roughly ten times as thick as a layer of clear coat. It absorbs the impact of small stones and light knocks that would otherwise chip the paint. Quality films are self-healing: light surface scratches disappear with the heat of the sun or warm water.
Installation needs a clean, controlled environment, film cut to the specific model and a great deal of experience to hide the edges.
Side-by-side comparison
| Ceramic | PPF | |
|---|---|---|
| Protects against stones and chips | No | Yes |
| Gloss and depth | Very high | High (satin versions also exist) |
| Water repellency, ease of washing | Very high | Good, better if ceramic-coated |
| Typical lifespan | 2–5 years depending on the product | 5–10 years depending on the manufacturer |
| Indicative cost in Switzerland | From around CHF 1,000–1,500 | Front end from around CHF 1,500, full body several thousand |
PPF costs vary a lot with the car model and the brand of film: treat these figures as a rough order of magnitude and always ask for a specific quotation.
What to choose depending on how you use the car
You drive on motorways or on track
The front end takes stone hits constantly, especially on the A2 motorway and the Alpine passes such as the Gotthard, San Bernardino and Furka. Here PPF on the bumper, bonnet, wings and mirrors is the most sensible investment. On the rest of the car, ceramic is enough.
You drive in town and keep the car in a garage
The main risk is wash marks and everyday dirt, not stones. A paint correction followed by a ceramic coating gives the best balance between result and cost.
Collector car or a car you rarely use
A quality sealant, renewed once or twice a year, with careful washing, is often all you need.
Two-stage paint correction and a ceramic coating that lasts up to 1 year with maintenance, with paint thickness measured before we start.
How to look after them
Both ceramic and PPF should be washed with a pH-neutral shampoo, microfibre mitts and no brushes. Avoid brush car washes and aggressive products. A maintenance wash every two or three weeks makes the protection last much longer: that is why, with a ceramic coating, we recommend a car wash subscription. For more on the costs, see our guide to ceramic coating prices in Switzerland.